Monday, February 22, 2010

Sausages Part II: The Go/No-Go Gauge


Albion provides material manufacturers a set of go and no/go gauges FREE OF CHARGE to insure that sausages are made consistently and will fit dispensing tools. The gauges are meant to provide a baseline. The two gauges check the diameter and the length of a sausage.

If there are issues with sausages that fit this gauge, then we can work to improve the process.

If there are issues with the gauges, please let us know and we will discuss them. Their purpose is to begin to establish a "STANDARD" to which all sausages for sealants and adhesives are manufactured to.

For more details on these gauges see the instruction sheet associated with the gauges on our web site HERE.

3 comments:

  1. Material Manufacturers -- Don't hesitate to contact us if you don't have them already or if the you have need more.

    ReplyDelete
  2. Mark has Pecora got one of these gauges?

    Marshall Murphey

    ReplyDelete
  3. Pecora does have these gauges along with Dow, BASF, Tremco, Sika, Momentive.... The ultimate question is are they using them. Generally speaking we have seen a significant drop in the number of oversize sausages in the marketplace. I can only surmise that they are using these gauges.

    ReplyDelete